(619) 663-5227CONTACT US

You have no items in your shopping cart.

Product was successfully added to your shopping cart.
  • Dryer Vent - Copper - Flush Mount Dryer Vent - Copper - Flush Mount
  • Dryer Vent - Copper - Stucco Mount Dryer Vent - Copper - Stucco Mount
  • Dryer Vent - Hammered Copper - Flush Mount Dryer Vent - Hammered Copper - Flush Mount
  • Dryer Vent - Stainless Steel - Flush Mount Dryer Vent - Stainless Steel - Flush Mount
  • Dryer Vent - Stainless Steel - Stucco Mount Dryer Vent - Stainless Steel - Stucco Mount
  • Dryer Vent - Stainless Steel - Stucco Mount (side) Dryer Vent - Stainless Steel - Stucco Mount (side)
  • Dryer Vent- Specifications Sheet Dryer Vent- Specifications Sheet

Louvered Dryer Exhaust Vent (4"-12")

Hooded Wall Vent (4"-12")

Quick Overview

Our Dryer Vent / Exhaust Vent (also known as a wall vent cover) is one of VentsUSA's best selling products and is available in a variety of materials and sizes. You can purchase this exterior wall vent in Copper, Stainless Steel, or Hammered Copper, in sizes ranging from 4", 6", 8", 10", and 12". This dryer vent cap is connected via an aluminum tube connector (8" length). Included with this wall vent cap is a filter screen to keep out insects or a damper to ensure one-way airflow, or both for an additional charge. The mesh screen is removable for easy dryer vent cleaning. This exterior wall vent is ideal not only for use as a dryer vent and exhaust vent, but can also be used as a kitchen range hood vent or external air vent. This wall vent cap is available in a flush or stucco mount depending on your application and wall siding. For mount type information, please refer to the below paragraph. This dryer vent / exhaust vent is also available with a more flat, flush looking face, as the Low Profile Louvered Dryer Vent / Exhaust Vent. For more information, please see product descriptions and drawings below.

Lead Time: 4 - 5 business days (Copper and Stainless Steel items may be stocked, Hammered Copper is not stocked)

Ship Time: 1-5 business days via standard UPS Ground (Dependent on shipping Zip Code. Click here for shipping map.) If you need your shipment in a shorter time frame, expedite fabrication fees and expedite shipping options are available by calling (619) 663-5227.


Availability: In stock

* Required Fields




  • Hooded exterior wall vent for dryer or other exhaust / intake (with screen only)
  • Perfect for dryer, bathroom, kitchen, and stove vent applications.
  • Made of 16 ounce Copper, Hammered Copper, or Stainless Steel
  • Flush and Stucco mount models available
  • Available with one way air damper and/or screen
  • Connection Pipe Length is 8" (standard)
  • Connection pipe is made of aluminum.


Dryer Vent Note: If you are using this product to vent a dryer it should not be ordered with a screen.  Order with flapper only.  A screen can catch the lint from your dryer causing a fire hazard.

Intake Vent Note:  If you are using this product as an intake vent or to exhaust a fireplace then order with screen only. The one way air damper (flapper) only lets air out.

Which Mounting Style? Copperlab's vents come in two different mounting styles.  The flush mount should be purchased if the siding of your building is already installed, or if your building is brick or stone.  The stucco mount model has a flashing and is meant to be installed prior to the siding installation.  This mount can best be used with stucco, or wood / vinyl siding (stucco mount vents must be installed underneath siding and water-proofing).

California Prop 65 WARNING

Additional Information

Manufacturer Copperlab
Application Bathroom Vent, Dryer Vent, Exhaust Vent, Fireplace Vent, Intake Vent, Stove Vent, Wall Vent
Installation Brick, Stone, Stucco, Wall, Wood
Material Copper, Hammered Copper, Stainless Steel
Product Drawing Stucco Mount Dryer Vent Drawing  (353 KB) 
Flush Mount Dryer Vent Drawing  (406 KB) 
Stucco Mount Dryer Vent CAD Drawing (132 KB)
Flush Mount Dryer Vent CAD Drawing (113 KB)
Stucco Mount Dryer Vent E-Drawing (Internet Explorer Only)
Flush Mount Dryer Vent E-Drawing (Internet Explorer Only)
Part Numbers
WDV4F 4" Dryer Vent Flush Mount w/ Flapper
WDV4F-FS 4" Dryer Vent Flush Mount w/ Flapper and Screen
WDV4J 4" Dryer Vent Stucco Mount w/ Flapper
WDV4J-FS 4" Dryer Vent Stucco Mount w/ Flapper and Screen
WDV6F 6" Dryer Vent Flush Mount w/ Flapper
WDV6F-FS 6" Dryer Vent Flush Mount w/ Flapper and Screen
WDV6J 6" Dryer Vent Stucco Mount w/ Flapper
WDV6J-FS 6" Dryer Vent Stucco Mount w/ Flapper and Screen
WDV8F 8" Dryer Vent Flush Mount w/ Flapper
WDV8F-FS 8" Dryer Vent Flush Mount w/ Flapper and Screen
WDV8J 8" Dryer Vent Stucco Mount w/ Flapper
WDV8J-FS 8" Dryer Vent Stucco Mount w/ Flapper and Screen
WDV10F 10" Dryer Vent Flush Mount w/ Flapper
WDV10F-FS 10" Dryer Vent Flush Mount w/ Flapper and Screen
WDV10J 10" Dryer Vent Stucco Mount w/ Flapper
WDV10J-FS 10" Dryer Vent Stucco Mount w/ Flapper and Screen
WDV12F 12" Dryer Vent Flush Mount w/ Flapper
WDV12F-FS 12" Dryer Vent Flush Mount w/ Flapper and Screen
WDV12J 12" Dryer Vent Stucco Mount w/ Flapper
WDV12J-FS 12" Dryer Vent Stucco Mount w/ Flapper and Screen
WEV4F 4" Exhaust Vent Flush Mount w/ Screen
WEV4J 4" Exhaust Vent Stucco Mount w/ Screen
WEV6F 6" Exhaust Vent Flush Mount w/ Screen
WEV6J 6" Exhaust Vent Stucco Mount w/ Screen
WEV8F 8" Exhaust Vent Flush Mount w/ Screen
WEV8J 8" Exhaust Vent Stucco Mount w/ Screen
WEV10F 10" Exhaust Vent Flush Mount w/ Screen
WEV10J 10" Exhaust Vent Stucco Mount w/ Screen
WEV12F 12" Exhaust Vent Flush Mount w/ Screen
WEV12J 12" Exhaust Vent Stucco Mount w/ Screen
All part numbers available in Stainless Steel and Hammered Copper. Prefix part number with "SS-" or "HC-" for corresponding material. Example: "SS-WDV10F" or "HC-WDV10F", etc.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

  1. Not like picture and poor quality review by Jim on 11/30/2016

    Bought a 6 inch stainless steel exhaust vent. Received product which was already scratched and dented from factory. Nothing like picture showed. There were spot welds on the side and picture does not show any. Picture showed heavy duty stainless. I received a very cheap flimsy product. Also back draft damper does not stay shut. Would not recommend product.

  2. Decent product review by M_K on 11/4/2015

    Bought the 6 inch one for my new range-hood and installed them the same day. All my previous vents were from the Home-Depot and plastic flaps usually survived no more than 2 or 3 harsh Ontario winters.

    When it is new it looks really sexy, I mean shiny and cool and making every neighbour jealous (unfortunately CopperLab site doesn't allow attaching images to reviews, or I would). I am not sure though for how long this copper shine will last.

    The sleeve is thick and made of quality stainless steel and I liked it. The copper is not really thick but sufficient for dryer or range-hood vent. I ordered one with wide edges (stucco) and if you try to hold it with fingers at the corner of these edges than edges will bend. The screen is soldered to a vent and it is not that easy to remove.

    In really windy days the foam cushion does help to reduce noise coming from flap, but does not eliminate this noise completely.

    Delivery to Canada a bit pricey (around $50).

    Overall vent feels OK and I hope it will last for long time.

  3. Good Product review by Chris on 10/8/2015

    Overall I was please with the quality of construction, but wished that the screen and foam cushion were incorporated with a bit more finesse. Also, I would love to see it made out of heavier gauge 20 oz copper.

  4. Beautiful., review by Remodeler from Texas on 7/20/2015

    Beautiful vent and replaces one that was very visible and ugly.

  5. Excellent product, I highly recommend! review by Syd on 7/18/2015

    Product (Copper Dryer Vent / Exhaust Vent) arrived quickly and exceeded my expectations. The high level craftsmanship is is obvious immediately. If you are looking for a well made quality product look no further.

    Thanks Copperlab!

  6. Excellent Product review by Abby on 6/18/2015

    I'm glad I kept shopping around until I found what I was looking for, a high quality part that will go well with my house brick exterior. I highly recomend CopperLab products.

  7. awesome product review by joe f on 5/2/2015

    I have now used 4 of these vents (in different configurations). Plus numerous other products from CopperLab I won't consider using anything else anymore. These things are awesome and will last a Lifetime. And copper is beautiful on any house (new or after patina). Thanks again

  8. Great product review by Joseph on 4/25/2015

    this is great compared to all the stuff I looked at the big box stores.

  9. Well done review by Gene on 4/16/2015

    Looks good what I was looking for

  10. Great quality but rubber seal should be on all three sides of the flapper. review by patricia on 4/8/2015

    The rubber was only on the bottom of this vent. It should be on all three sides. However, I was very pleased with the quality of this vent.

  11. well made review by Joseph on 4/4/2015

    I have been putting this job off for awhile because I could not find a high quality product . This one is great , Thanks .

  12. Quality Product review by Lou on 3/23/2015

    Well built of high quality materials. Substantial. Fast shipping. Will last a long, long time.

  13. Good looking review by Floyd on 3/22/2015

    Is a well built vent,client was happy

  14. Great product review by Lyn on 3/2/2015

    Copper dryer vent is just as advertized, great quality and well made. Fast shipping. I will definitely be a returning customer.

  15. beautiful vent, quick delivery review by Thomas on 2/18/2015

    Well built and looks great. Delivered within a few days. Fantastic. thanks

  16. awesome review by Joe F on 11/9/2014

    Wow. Finally. A well built dryer vent. And beautiful as well. Stucco flashing was perfect. Thanks

  17. I would of like to gave a 5 star rating review by willd on 10/13/2014

    The quality and the construction is excellent.The seams are soldered which make it sturdy enough to last many years. The only problem I had was the screen interfered with the vent opening and closing all the way. After playing with it for a while it seems to operate properly. I will still leave the screen off because I don't feel comfortable with it taken a chance the the flap will not open.

    Response form Copperlab: Unfortunately a batch of our dryer vents were made with flappers that were too long. We have fixed the problem and it won't be happening any longer. Thanks for your feedback

  18. AS ADVERTISED review by GORDY on 10/7/2014


  19. Decent product, allow lead time review by Jeff on 8/22/2014

    Ordered one dryer/exhaust vent to check out quality prior to purchasing a quantity. Approximately 2 weeks until in-hand, and thus too late to "sell" the builder on using this product for entire house.
    Good solid product and is well made. Ordered with screen, which I could not remove by hand (that may be a good thing) but may make lint removal difficult.
    Was concerned about connecting aluminum dryer vent ducting to copper, but the (tapered, thank you) sleeve is of stainless steel.
    Nice product.

    Reply from CopperLab: Jeff, sorry for the shipping delay. We have been running about a five day lead time as of 8/1/14 because of high demand. We appreciate your feedback and we are working on getting our lead time back down to 1-2 days. Thanks.

  20. Good product and great customer relations! review by Ron on 4/15/2014

    Our clients love the durability of these vents.

  21. great looking; looks well-constructed review by Craig on 3/26/2014

    Not your big-box store junk. Well made. Should look great and last forever.

  22. great looking; looks well-constructed review by Craig on 3/6/2014

    Quite an upgrade from the common vent in looks and in craftsmanship. Haven't installed them yet, but I'm anticipating a great-looking durable detail to my new house.

  23. Good, with room for improvement review by Vespa on 11/18/2013

    Hammered copper 4" vent looks great, seems well made. and fills a niche in the market for metal option. I was happy to discover this vent online. Extension tube fits snugly over dryer outlet. Attachment ears with tiny holes are a concern. Interior flap fits a bit loosely and is not hinged.

  24. Overall good, with 2 flaws review by Rob on 8/28/2013

    Overall this is well made. However, the 4" tube is EXACTLY 4" OD, making it necessary to modify it (with difficulty) so it fits inside 4" aluminum flexible dryer ducting as commonly found at Home Depot. Also, the grating piece 'clips' onto the outlet opening, and is not adequately secure. I had to install a removable pin to lock it in place. Otherwise, design is good.

  25. Pleasantly Surprised review by chuck n. on 3/14/2013

    My installer and I were pleasantly surprised at the construction of this vent. Looks to be machine cut and assembled by hand. Seams are soldered which is a great touch.

  26. great vent review by jim on 2/17/2013

    great vent. copper looks good.

Write Your Own Review

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars

Create New Question

Please Sign up or Log in to ask a question
Does the copper age with time, or does it have a finish which does not allow aging.
We use only natural copper. It will patina with age.
Mark answered on January 4, 2015
Can I cut off the nailing strips, or can this product be ordered without the nailing strips?
Yes, you can easily snip off the nail holes on the top and bottom of the vent. No it can not be ordered without them, it is part of the design which is cut out by a waterjet machine.
Bill answered on August 23, 2014
Can screen be removed to clean?
The screen is removable. It clamps to the bottom opening of the vent. It can be removed and reinstalled.
betty answered on July 26, 2014
how much wider is the outside flange compared to the 4 inch outlet pipe? Do you have the dimensions of the overall square of the hood?
The outside flange on the Hooded Wall Vent is 6" x 6", so the flange would be 1" wider on every side. The outside dimensions of the overall square of the hood are 6" x 6" with a .5" nailing strip at the top and bottom. If you scroll down to the bottom of the product page on the website you can find the Specification Sheet pdf, CAD, and E-drawings for each product.
phik answered on March 26, 2015
Is the 4" stainless steel model with flapper available using 316 stainless?
All of our stainless steel vent products are made of 26 gauge 316 marine grade stainless steel.
Brian Haley answered on August 13, 2014
Because of space limitations I need to remove the entire nailing strip not just the nail holes. Is there any reason why I can't shear off the nailing strips (e.g. the vent will fall apart)?
Bill, you could snip away the entire nail strip. It will not affect the integrity of the vent.
Bill answered on August 24, 2014
How do I determine the size vent to order?
Our sizes are the diameter of the pipe size you are connecting to. Most typical is 4" size for dryer vents and bathroom vents.
Julia Cain answered on September 28, 2014

Also Purchased